Hydro-X DST-2 240V Temperature Device Station

Hydro-X DST-2 240V Temperature Device Station

The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. This module allows control of any heating or cooling device under the world voltage standard (100-240 VAC, 50/60 Hz), up to 10 amps.

LED Status:

• * Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller.
• *Pressing the small button on the module will address/link the module when first installed.
• * Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.
• * SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.
• * Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.
• * By pressing and holding the button on the DST-2, users can manually override the module and turn it ON / OFF.

PACKAGE CONTAINS: 1 x Device Station, 1 x 16ft RJ12 Cable, 1 x 4ft RJ12 Cable, 1 x RJ12 T-Splitter

Features:

• LED Power Indicator
• RJ12 Cable Socket
• Addressing
• Plug & Play

Technical Specifications and Documents:

• Input Voltage: 240VAC, 50/60Hz
• Output Current: 10A
• Output Voltage: 240VAC, 50/60Hz
• Working Environments: Temperature 32-122°F, Humidity=90%
• Package Dimensions: 85mm(L) x 80mm(W) x 90mm(H)

View DST-2 Temperature Device Station Cut Sheet